Miele KM 6200 Manuel d'utilisateur télécharger pdf (Page 18)

Installing the hob

Feed the hob connection cable down

through the cut-out.

Position the hob on the spring

clamps.

Using both hands, press down

evenly on the sides of the hob until it

clicks into position. When doing this,

make sure that the seal under the

hob sits flush with the worktop on all

sides. This is important to ensure an

effective seal all round.

Do not use sealant (e.g. silicone).

If the corners of the frame are not

flush with the worktop surface, the

corner radius (ß R4) can be carefully

scribed to fit.

^ Connect the hob to the mains.

^ Check that the hob works.

The hob can now only be removed

with a special tool.

Hob with frame or bevelled edge

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

Miele KM 6200 Manuel d'utilisateur Page 18