Miele PG 8080i Instructions d'exploitation télécharger pdf (Page 67)

Cleaning the water supply

screen

There is a screen in the screw

connection of the water inlet hose to

protect the water inlet valve. The screen

must be cleaned when dirty, otherwise

insufficient water will flow into the wash

cabinet.

The plastic housing of the water

connection contains an electric

valve. The housing must not be

immersed in water.

Recommendation

If the water supply contains a large

amount of insoluble substances, we

recommend fitting a large-area filter

between the tap and the water inlet

hose.

This filter is available from Miele.

To clean the screen:

Disconnect the dishwasher from the

electric power supply. Always switch

the appliance off before unplugging

it.

Turn off the water supply.

Unscrew the water supply valve.

Take the seal ring out of the screw

connection.

^ Use needlenose pliers to pull out the

screen, then clean it.

^ When removing the screen, take care

not to pull out or displace the flow

regulator behind it.

^ Replace the screen and seal. Make

sure they are positioned correctly.

Reconnect the water supply valve to

the tap. Make sure not to

cross-thread the connection.

Turn the water supply back on.

If the connection leaks it might be too

loose or cross-threaded.

Unscrew and reconnect the water

supply valve correctly.

User maintenance instructions

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Miele PG 8080i Instructions d'exploitation Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Miele PG 8080i