Miele PG 8080i Instructions d'exploitation télécharger pdf (Page 65)

All work on the electrical

connection must be carried out by

Miele Service.

–

The electrical installation must be in

compliance with current local and

national safety regulations.

–

The plug connection must comply

with national regulations. (The

electrical outlet must be accessible

after the appliance has been

installed.) This facilitates access for

electrical safety checks, for example

when the appliance is being repaired

or serviced.

– If the appliance is hard wired, a

multiple-pole circuit breaker must be

installed. The contact opening at the

main breaker must be at least 3 mm

wide and lockable in the open

position.

– If necessary, an equalization of the

potentials must be carried out.

–

If replacing the power cord, use only

original Miele replacement parts or a

suitable cord with core cable ends.

–

For technical data, see the data plate

or the attached wiring diagram!

The appliance must only be operated

with the voltage, frequency and fuse

rating shown on the data plate.

A conversion may only be performed

according to the attached conversion

diagram and wiring diagram.

The data plates are at the back of the

appliance and along the right edge of

the open door.

The wiring diagram comes with the

appliance.

The conversion diagram is attached to

the base panel behind the plastic base

cover.

Electrical connection

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 83 84

Commentaires sur ces manuels

Pas de commentaire

Miele PG 8080i Instructions d'exploitation Page 65

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle Miele PG 8080i