Miele Conn@ctivity XKM 2000 KM Manuel d'instructions télécharger pdf (Page 5)

All electrical work should be carried

out by a suitably qualified and

competent person in strict

accordance with current local and

national safety regulations (BS 7671

in the UK).

This appliance can be connected to the

mains electricity supply either via a

plug and switched socket or via a

suitable fused spur connection unit.

The socket and on-off switch should be

easily accessible after the appliance

has been built in.

Connection to a fused spur connection

unit must be carried out by a suitable

qualified electrician only.

If the connection socket is not

accessible after installation (depending

on country) an additional means of

disconnection must be provided for all

poles. When switched off there must be

an all-pole contact gap of 3 mm in the

switch (including switch, fuses and

relays).

See data plate for connection details.

Ensure that these match the mains

supply.

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

The appliance must only be

operated when built-in. This is to

ensure that all electrical parts are

shielded. Live parts must not be

exposed.

Do not connect the appliance to the

mains electricity supply via an

extension lead. These do not

guarantee the required safety of the

appliance.

Total connected load

See data plate

Voltage and fuse rating

AC230V/50Hz

Fuse rating 10 A

Release Type B or C

Residual current device

For extra safety it is advisable to install

a suitable residual current device with a

trip current of 30 mA.

Electrical connection

5

1 2 3 4 5 6 7 8 9 10 ... 31 32

Commentaires sur ces manuels

Pas de commentaire