Miele CS 1212 Instructions d'exploitation

Installation InstructionsCS1212 I CS1221 I en - CA Installation, repair and maintenance work should be performed by a Miele authorized se

Safety distance when installing the appliance near a wall with trim or a backsplashA minimum distance of 2" (50 mm) between the trim or back spla

Installation dimensionsCS 1212a Spring clipsb Appliance frontc Installation heightd Power supply box with connection cableInstallation34

CS 1221a Spring clipsb Appliance frontc Installation heightd Power supply box with connection cableInstallation35

Cut out^ Make the worktop cut-out for one ormore appliances as applicable.Remember to maintain a minimumsafety distance from the back wall,as well as

Installation of multipleappliancesWhen installing more than one combiset appliance, a support bar b must beinstalled between the appliances.Countertop

Sample calculations for a countertop cut-out for three appliancesAappliance widthminus5/16"(8mm)Bappliance widthCappliance widthminus5/16"(8

a Spring clipsb Support barsc Space between support bar and countertopAn additional support bar is required for each additional appliance. The positio

Attach the spring clips andsupport barsWood or solid surface countertops^ Place the supplied spring clips aand the support bars b at themarked positio

^ Coat the edges of the spring clips a,^ and the space d between thestrips b and the countertop withsilicone (supplied).Installation41bda

Installing the appliance^ Feed the power cord down throughthe cut-out.^ Then place the front side of theappliance in the countertop cut-out.^ Then wit

WARNING- When using yourappliance follow basicprecautions, including thefollowing:Read all instructions beforeinstallation or use to preventinjury and

SealingThe appliance must not be permanentlysealed into the countertop wheninstalled. The sealing strip under theedge of the appliance provides asuffi

,CAUTION: Before installation orservicing, disconnect the powersupply by either removing the fuse,shutting off the main power supplyor manually "

Alteration rights reserved / 4608For the most updated manual see the Miele web site.M.-Nr. 07 353 950 / 00

Technical Safety~Installation, repair and maintenancework should be performed by a Mieleauthorized service technician. Work byunqualified persons coul

~Do not cook on a broken combiset.Any breakages or cracks in the ceramicsurface of the appliance are defectsand must be treated as such. If thecombise

~Do not store items on the appliancewhen not in use. Items could melt orcatch fire from residual heat or if theappliance is turned on inadvertently.Al

~Pot and pan handles should beturned inward and not extend over thecountertop to reduce the risk of burns,ignition of flammable materials, andspills.~

Note to the installer:Please leave this instruction bookwith the consumer for the localelectrical inspector’s use.The minimum distances given inthese

Safety distances above theapplianceThe minimum safety distance given bythe hood manufacturer must bemaintained between the combiset andthe hood above

Safety distances to the sidesof the applianceThe appliance should only be installedas shown in the illustrations, whilemaintaining the required safety