Miele GAS COMBISET CS 1011 Manuel d'utilisateur télécharger pdf (Page 7)

Cleaning the appliance

^

Remove any protective packaging or

labels.

^

Make sure the drain valve is closed.

^

Fill the reservoir with approximately

1 gallon (4 l) of water and add a

small amount of dish soap. Make

sure the water level is no higher than

the maximum level marked on the

rear of the reservoir.

^

Turn the control knob clockwise to

275°F (130°C) and bring the water to

a boil.

^ Once the water starts to boil, turn off

the fryer by turning the control knob

counterclockwise to "0". Allow the

water to cool to a safe temperature

before draining. Empty the water into

a heat resistant container by slowly

opening the drain valve by turning it

counterclockwise (see "After using

the fryer").

^

Rinse the reservoir thoroughly with

hot water.

^

Close the drain valve by turning it

clockwise, raise the heating element,

and dry the reservoir with a clean

cloth.

^

Clean the other surfaces of the

appliance with a damp cloth and dry

with a soft cloth.

Heating the appliance

Metal components of the appliance

have a protective coating which may

give off a slight odor the first time the

appliance is heated.

The smell will dissipate after a short

time and does not indicate a faulty

connection or appliance defect.

Before using for the first time

7

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Commentaires sur ces manuels

Pas de commentaire