Miele F1911VI Manuel d'utilisateur télécharger pdf (Page 30)

Re-setting the filter indicator

The filter indicator still flashes in the

display.

Touch the access button "p"soit

turns yellow.

Note the position of the button X, but

do not touch.

Touch the access button "p" again so

it turns white.

Only the access button "p" is visible.

^ Place one finger on the position of

the X button and hold (the X button

will not be visible).

While holding down the X button,

press the access button "p" once.

Keep holding the X button down until

the following appears in the display

(approx. 5 seconds).

Tap the X button until an ^ appears

in the display.

Touch the access button "p" again.

By touching the X button you can

select the following settings:

^0: filter is installed

^1: filter is not installed (external filter)

^2: filter change confirmed

^-: return to menu

^ Tap the X button until ^2appears in

the display.

^1should only be selected if an

external filter or bypass cartridge is

being used. See "Deactivating the

water filter".

Press and hold the access button "p"

for 2 seconds to confirm the filter

change.

The filter is now reset.

Water filter

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

Pas de commentaire

Miele F1911VI Manuel d'utilisateur Page 30