Miele KM2354 Manuel télécharger pdf (Page 20)

Switching on

The control for the burner required must be pressed in and

turned anti-clockwise to the largest flame symbol to switch

on.

Pressing a burner control will automatically create a spark

on all burners. This is normal and no cause for concern.

When the flame ignites, keep the control pressed in for

8-10 seconds, and then let it go.

If the flame goes out prematurely, turn the control to "ß".

Wait for at least one minute before trying again. If

necessary keep the control pressed in for longer.

^ If the burner does not ignite the second time, turn the

control to "ß", and see "Problem solving guide".

In the event of a power cut

If there is an interruption to the electricity supply the gas can

be ignited with a match.

^ Press in the relevant control and turn it anti-clockwise to the

largest flame symbol.

^ Hold the control pressed in and light the burner with a

match.

Keep the control pressed in for a further 8-10 seconds and

then release it.

Operation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

Pas de commentaire

Miele KM2354 Manuel Page 20