Miele KM2357 Manuel télécharger pdf (Page 20)

Switching on

When using the gas hob an extractor hood or a ventilation

facility must be used.

The control for the burner required must be pressed in and

turned anti-clockwise to the largest flame symbol to switch

on. The ignitor will make a clicking sound and ignite the

gas.

When a control is operated, a spark is produced on all

cooking zones. This is not a fault.

If the burner does not ignite, turn the control to off "ß". Air the

room or wait at least 1 minute before trying again.

If the burner does not ignite the second time, turn the control

to "ß", and see "Problem solving guide".

When switching on, re-ignition sometimes occurs (1-2 clicks)

if the flame on the ignition safety device has gone out briefly,

or if the thermal element is not hot enough, e.g. following a

gust of air.

Operation

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Pas de commentaire

Miele KM2357 Manuel Page 20