Miele KM6204 Instructions d'exploitation télécharger pdf (Page 50)

You can change the default settings of the programme

options (see chart). Several settings can be altered in

succession.

After selecting programming mode, P (Programme) and S

(Status) will appear in the timer display. On hobs with 3

cooking zones, an additional indicator will appear at the rear

left.

The programme is shown in the cooking zone displays at the

front left and rear left. Example:

Programme 03 = front left 0, rear left 3

Programme 14 = front left 1, rear left 4

The status is shown in the front right cooking zone display.

To select programming mode

^ With the hob switched off, touch the s and $ sensors at

the same time until the safety lock indicator lamp flashes.

To set the programme

^ To set the units position first touch the sensor for selecting

the rear left cooking zone and then touch the relevant

number on the numerical keypad.

^ To set the tens position first touch the sensor for selecting

the front left cooking zone and then touch the relevant

number on the numerical keypad.

To set the status

Touch the sensor for selecting the front right cooking zone

and then touch the relevant number on the numerical

keypad.

To save settings

Touch the s sensor until all the displays go out.

To not save settings

Touch the $ sensor until all the displays go out.

Programming

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Pas de commentaire

Miele KM6204 Instructions d'exploitation Page 50