Miele B 890 Informations techniques télécharger pdf (Page 11)

Technical Information

B890 Rotary Iron

2.0 Installation

1. Unpack / uncrate the appliance from the box.

2. Remove the Transit Fitting - see supplementary information for details.

3. Move the appliance to the desired location - see supplementary information

for details on moving the appliance.

4. Install recommended plug to the power cord - DO NOT plug in at this time.

5. Unlatch; remove the Feed Board from the appliance - see figure 1.

6. Plug the appliance in; briefly turn on the power - the Heater Plate should rise.

7. Turn off the power.

8. Remove the protective cover from the roller - see figure 2.

9. Perform an operational check; ensure all safety features and functions are in

working order.

Figure 2-2: Removing the protective cover

from the roller.

Figure 2

First remove the feed board

by lifting it out of the right hand holder,

then pull it out to the left of the roller.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

Pas de commentaire

Miele B 890 Informations techniques Page 11