Miele HM 16-80 Instructions d'exploitation

Operating InstructionsRotary IronHM 16-80To prevent accidentsand machine damageread these instructionsbeforeinstallation or use.M.-Nr. 07 660 670en-US

The rotary iron sits on 4 rollers.^ Hold the iron by the ironing table andpush or pull to move it.To steer the iron and to handleobstacles such as car

Power cordThe power cord is wound behind theironing table.^ Unwind the cord.,Do not insert the plug into theelectrical socket yet.Before using for the

A dust cover is placed on the roller forprotection during shipping.^ First remove the feed board by liftingit out of the right hand holder, thenpull i

Preparing the work areaWhen positioning the rotary iron, makesure it is level. This will ensure evensteam production and keep theappliance from rollin

Pulling into shape and smoothingout^Pull the dampened laundry intoshape as usual.^Smooth out any ribbons, straps,seams, and hems.^Large items such as

For ironing dry or nearly dry laundryitems, the steam setting can be used.Ironing with and without steamIf the laundry items are already damp,use the

Emptying the water reservoir,Do not attempt to empty thewater reservoir unless the roller andwater are both cool.Always empty the reservoir once youha

Turning on and offUse the I-0 button to turn the rotary ironon and off.To turn on^ Press the button in.The indicator light comes on.To turn off^ Press

^Turn the temperature selector to thedesired temperature.The "Temperature" indicatoroC will lightup while the roller is heating up.The light

Selecting the roller speedThere are 5 roller speed settings, fromlow (approximately 6.5 ft/min.[2 m/min])to high 15 ft/min. [4.5 m/min]).A lower rolle

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Guide to the Rotary Iron . . . . . . . . . . . . . . .

Positioning the laundry^Arrange the laundry items on thefeed board so that they are straight,and smooth them out by hand.^ Then turn the roller by han

Tips–To avoid creasing:Stop the roller, pull the item backtowards you slightly, and smooth itout by hand. If needed, dampenagain with a wet cloth or s

Power failureIn the event of a power failure, pullthe emergency release lever up.If there is a power failure while the ironis in use, the heater play

Towels, dishcloths,handkerchiefs, napkins, etc.^Lay the item with the straight grain ofthe fabric to the feed board.This will prevent it from losing i

Duvet coversIf the duvet cover has buttons at theopen end, iron the buttons first.Note: Only pass this end through therotary iron if the buttons arehe

Shirts^Remove the feed board to iron shirts.1. Shoulder yoke^ Arrange the yoke, collar first, on theroller and smooth out.^ Hot press the yoke.2. Coll

4. Back^ Start at the side seam. Pull the shirtover the roller as far as the arm hole.Smooth it out.^ Starting from the side seam iron pastthe armhole

Smock-type aprons^Iron smocks as you would a shirt.Aprons with ties^Iron the ties one by one up to the bib,then over the bib and up to thewaistband.^T

,Turn the iron off and unplug itfrom the outlet before performingany maintenance work.Cleaning the heater plate^Check that the temperature selectoris

Ironing coverIt is normal for the ironing cover on theroller to become slightly brown with use.Wash the cover with a hot temperatureprogram (140°F [60

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Cleaning the water reservoir ...

^ Hold the corners of the cottonpadding, pull taut, and lay it taughtover the heater plate.Note : the slot for the cotton paddingis now at the top.^In

Once the roller has completed 3 or 4revolutions and the end of the ironingcover is under the heater plate:^Turn the rotary iron off while keepingthe f

,Repairs should only be carried out by an authorized technician inaccordance with local and national safety regulations. Unauthorized repairscould cau

No steam is being produced.The indicator light Q for "Steam" goes out while ironing.Possible fault SolutionThe iron temperature is too low f

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

The appliance is supplied with a powercord and NEMA 6-20 P plug ready forconnection to an a.c. single phase220-240 V 60 Hz power supply (seedata plate

Height 373/4" (folded 413/8") [95.9 (folded 105.2) cm]Width 383/4" (folded 195/8") [98.5 (folded 50) cm]Depth 15" [38 cm]Weig

Disposal of packing materialsThe cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle.Ensure that any plastic wrapping,

38

39

When using an electrical appliance,basic precautions should always befollowed, including the following:Read the operating instructionscarefully before

M.-Nr. 07 660 670 / 01All rights reserved / 1213INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOSTCURRENT PRODUCT SPECIF

~Do not use an extension cord toconnect this appliance to electricity.Extension cords do not guarantee therequired safety of the appliance(e.g. danger

~Turn the appliance off beforeremoving the plug from the electricaloutlet.~Pull only on the plug and not on thepower cord.~Do not lay the power cord o

a Emergency releaseb Temperature selectorc Control paneld Release catche Power cordf Foot pedal switchg Ironing tableh Laundry rodi Feed boardj Roller

Control panela Roller speed selectorb On/Off indicator I-0c On/Off button I-0d Steam switch Qe Steam indicator Qf Temperature indicatoroCg Water empty

Transport strutDo not remove the transport strutuntil the rotary iron has been placedonto the four rollers.^Pull out the transport strut.Keep the stru