Miele B 1847 Instructions d'exploitation télécharger pdf (Page 31)

Fan

The fan on the ironing table is

controlled with the o, p or n, m

buttons.

B 1312 only:

The blow function is activated by the o

button.

The suction function is activated by the

p button.

B1826 and B 1847 only:

You can switch between the blow and

suction functions with a single press on

the n button.

You can switch between the two power

output levels with a single press on the

m button.

Power setting1=1fanactive

Power setting2=2fans active

The fan/s are located on the underside

of the ironing table.

Suction function

The suction function assists steam

permeation of textiles, avoids the

formation of condensation on the

ironing table and holds the item so that

it does not slip off the ironing table.

Blow function

The blow function creates a cushion of

air between the textile and the ironing

table and helps prevent seams being

pressed into the garment. It also assists

with ironing frills, sequins, etc and

allows you to iron without flattening the

fabric.

Automatic switch on/off

Automatic switch on/off ensures that the

fan starts at exactly the right time when

using steam.

After a short running-on time the fan

stops automatically, because the fan is

not needed during pauses in ironing,

e.g. when the textiles are being folded.

Memory function

The memory function saves the

last-used fan direction and power

setting.

Heated ironing surface

When the appliance is switched on, the

ironing surface will heat up

automatically, helping to reduce the

formation of condensation on the

ironing table.

Ironing

31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Commentaires sur ces manuels

Pas de commentaire