Miele S 6790 Instructions d'exploitation télécharger pdf (Page 32)

When to change the thread

lifters

The thread lifters on the suction inlet to

the floorhead and the upholstery nozzle

can be replaced.

Check them from time to time and

replace them if the pile has worn down.

Correctly replacing the thread

lifters

^

Use a suitable tool to remove them

from the slots. There are two notches

for this.

^ Fit new thread lifters.

FiberTeQ and AirTeQ floorheads

^ Use a suitable tool to remove the

thread lifters from the slots, starting at

the sides.

^ Fit new thread lifters.

Cleaning the floorhead roller

(not possible on the FiberTeQ and

AirTeQ floorheads)

a Release the bearing (with bayonet

fitting) using a coin.

b Press the bearing out, and remove.

c Remove the roller.

^

Remove any threads and hair, replace

the roller and refit the bearing.

Spare parts are available from your

Miele Vacuum Cleaner Specialist, from

Miele (see back cover for contact

details) or via the internet at

www.miele-shop.com.

Maintenance and care

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Commentaires sur ces manuels

Pas de commentaire