Miele G 7893 Manuel d'utilisateur télécharger pdf (Page 24)

Spring adapter for the water

connection

The spring adapter for the water

connection must be properly engaged

when a basket or the injector wagon is

inserted into the machine. It must be

4-5mmhigher than the water inlet in

the machine.

If this is not the case, the adapter

needs to be adjusted as follows:

Loosen the locking ring a.

Move the adapter up to the proper

height b.

Tighten the locking ring c.

Adjusting the upper basket

The upper basket can be adjusted

above and below the middle position,

by 2 cm.

Depending on the height selected and

which inserts are used, labware of

various heights can be arranged in the

baskets.

To adjust the upper basket:

Pull the upper basket out as far as it

will go, lift it up off the runners and

remove.

^ Use a wrench to unscrew the roller

bearings on either side of the basket,

then reposition as required.

Loading the machine

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Pas de commentaire

Miele G 7893 Manuel d'utilisateur Page 24