Miele KM 3054 Instructions d'exploitation télécharger pdf (Page 36)

Problem Possible cause Remedy

The ignitor on the

burner does not

spark.

The mains fuse has tripped. If it has, contact a qualified electrician or Miele.

- Food deposits have lodged

themselves between the

ignitor and the burner cap.

- There are food residues

on the ignition safety device.

Remove any soiling. See also "Cleaning and care".

One of the

following fault

messages

appears in the

minute minder

display:

LC The system lock has been

activated.

You need to deactivate the system lock (see

"System lock").

FL Sensor fault Make sure that there is no direct light (from the sun

or from an artificial source) falling onto the cooktop.

The area surrounding the cooktop must not be too

dark.

Make sure the cooktop or the sensor switches

aren't covered. Take any pans off the cooktop and

wipe away any food deposits.

Interrupt the power supply to the cooktop for

approx. 1 minute.

If this does not solve the problem, please call Miele.

(In-operation /

Residual heat

indicator lights

are flashing)

The overheating protection

mechanism has been

activated.

Turn all the control knobs clockwise to position "ß".

You can operate the cooking zones again once F2

has disappeared.

(In-operation /

Residual heat

indicator lights

are flashing)

Electronic fault Reset: Touch the easy switch-off function sensor for

three seconds.

If this does not solve the problem, please call Miele.

All other faults There has been a fault in the

electronics.

Interrupt the power supply to the cooktop for

approx. 1 minute.

If the problem persists after reconnecting the

appliance to the power supply, please contact

Miele.

Problem solving guide

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Miele KM 3054 Instructions d'exploitation Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Miele KM 3054