Miele KM2335 Manuel télécharger pdf (Page 31)

With the help of the following notes, minor faults in the performance of the

appliance, some of which may result from incorrect operation can be put right

without contacting the Service Department saving you both time and money.

The following guide may help you to find the reason for a fault, and to correct it.

You should, however, note the following:

Repairs to the gas and electrical components of this appliance must only

be carried out by a suitably qualified and competent person to ensure safety

(Gas Safe registered in the UK). Repairs and other work by unqualified

persons could be dangerous. The manufacturer cannot be held liable for

unauthorised work.

Problem Possible cause Remedy

The burner does not ignite

when the hob is being

used for the first time or

after a long period of not

being used.

There could be an air

lock in the gas pipe.

Repeat the ignition process as necessary.

Allow a minimum interval of 1 minute between

each ignition attempt to prevent a build-up of

unburnt gas.

The burner does not ignite

after several attempts.

The burner is not

correctly assembled.

Assemble the burner correctly.

The gas supply tap is

turned off.

Turn on the gas supply tap.

The burner is wet or

dirty.

Clean and dry the burner.

The flame slits are

blocked and/or wet

Clean and dry the flame slits.

Problem solving guide

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Pas de commentaire

Miele KM2335 Manuel Page 31