Miele CS 1326 Manuel d'utilisateur télécharger pdf (Page 23)

Switching on

^

The control for the burner must be

pressed in and turned anti-clockwise

to the ignition position a to switch

on.

^

When the flame ignites, keep the

control pressed in for 8-10 seconds,

and then let it go.

If the flame goes out, repeat the

procedure, keeping the control pressed

in for a few extra seconds.

In the event of a power cut

If there is an interruption to the

electricity supply the gas can be

ignited with a match:

^

Press in the relevant control and turn

it anti-clockwise to the large gas

symbol.

^

Hold the control pressed in and light

the gas at the burner with a match.

^

Keep the control pressed in for a

further 8-10 seconds and then

release it.

Regulating the flame

Control the flame so that it does not

spread out beyond the sides of the

pan. As the outer part of the flame is

much hotter than the centre, the tips of

the flames should stay beneath the pan

base. Flame tips which extend beyond

the sides of the pan merely warm up

the air in the room and can also

damage pan handles and increase the

risk of injury.

There is a resistance at the 6 o'clock

position to prevent you turning the

control to the high or low setting

unintentionally. To move from the high

to the low setting, you need to press the

control down to be able to pass the 6

o'clock position.

^ To move from the high to the low

setting, turn the control anti-

clockwise until it meets a resistance.

Then press it down and continue to

turn it past the resistance before

releasing it. You can now select the

setting you require.

^

To move from the low to the high

setting, turn the control clockwise

until it meets a resistance. Then

press it down and continue to turn it

past the resistance before releasing

it. You can now select the setting you

require.

Switching off

^

Turn the control clockwise to position

ß b.

This stops the flow of gas and the flame

goes out.

Operation

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Commentaires sur ces manuels

Pas de commentaire