Miele CS 1326 Manuel d'utilisateur télécharger pdf (Page 29)

Stainless steel surfaces

Clean stainless steel surfaces with a

solution of warm water and a little

washing-up liquid applied with a soft

sponge. In the case of stubborn

dried-on soiling, soak first.

Finally, dry with a soft cloth.

If necessary a ceramic hob and

stainless steel cleaning agent can be

used (see "Optional accessories").

Apply with even pressure following the

direction of the "grain".

Do not use stainless steel cleaning

agents on printed surfaces. This

would rub off the print. These areas

should be only cleaned with a

solution of warm water and a little

washing-up liquid applied with a soft

sponge.

A conditioning agent for stainless steel

can be used after cleaning to help keep

your appliance looking good (see

"Optional accessories").

Apply sparingly with a soft cloth

following the instructions on the

packaging.

Pan supports, control knobs

Remove the pan supports. Clean

stainless steel surfaces with a solution

of warm water and a little washing-up

liquid applied with a soft sponge.

Stubborn soiling should be soaked first.

After cleaning dry all surfaces with a

clean cloth.

Do not clean the pan supports in a

dishwasher.

Cleaning and care

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Pas de commentaire

Miele CS 1326 Manuel d'utilisateur Page 29