Miele CS 1326 Manuel d'utilisateur télécharger pdf (Page 33)

This appliance must be installed and

connected to services in

accordance with local and national

safety and building regulations.

To avoid the risk of damaging the

hob fit the wall units and extractor

hood before installing it.

~

The room in which the gas hob is

installed must be at least 20 m

3

in size

with a door or window in it which can

be opened to the outside air.

~

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

~

This appliance must not be used in

a non-stationary location (e.g. on a

ship).

~

An electric fryer must not be

installed directly next to a gas hob, as

the gas flames could ignite the fat in the

fryer. It is essential to maintain a

distance of at least 288 mm between

these two appliances.

~

A gas hob may not be built in over a

fridge, fridge freezer, freezer,

dishwasher, washing machine or

tumble dryer.

~

The hob may only be installed

above a Miele oven if the worktop is at

least 40 mm thick.

~

Ensure that the gas pipe and

electrical cable are installed in such a

way that they do not touch any parts of

the appliance which become hot. This

could cause damage.

~

The electrical cable and any flexible

gas connection pipes must be installed

in such a way so that they do not come

into contact with any moving kitchen

parts (e.g. a drawer), and cannot

become trapped.

~

Observe carefully the safety

distances given on the following pages.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Commentaires sur ces manuels

Pas de commentaire