Miele 51608965USA Manuel d'installation télécharger pdf (Page 7)

Technical safety

Before setting up the appliance stack, check it for any externally

visible damage.

Do not install or use a damaged appliance.

The electrical safety of this appliance stack can only be

guaranteed when it is correctly earthed. It is most important that this

basic safety requirement is observed and regularly tested, and

where there is any doubt the on-site wiring system should be

inspected by a qualified electrician. The manufacturer cannot be

held liable for the consequences of an inadequate earthing system

(e.g. electric shock).

Unauthorised repairs could result in unforeseen dangers for the

user, for which the manufacturer cannot accept liability. Repairs

should only be undertaken by a Miele approved service technician.

If this is not done, any resultant damage will not be covered by the

guarantee.

Do not make any alterations to the appliance stack, unless

authorised to do so by Miele.

To ensure the correct performance of the appliances and to

prevent the risk of faults and fire, it is important to check it and carry

out maintenance on a regular basis.

This washer-dryer and tumble dryer stack must only be

connected to the on-site water supply using a hose that is in good

condition. Old hoses must not be re-used. Check the hose regularly

for signs of wear. Change in good time to avoid the risk of leaks and

subsequent damage.

Warning and Safety instructions

1 2 3 4 5 6 7 8 9 10 11 12 ... 95 96

Pas de commentaire

Miele 51608965USA Manuel d'installation Page 7