Miele 09 741 510 Manuel d'utilisateur télécharger pdf (Page 4)

Installing the stainless steel

tubing in the unit

Make sure the stainless steel tube is

not kinked or damaged. Do not trim

stainless steel tube.

^

Remove the water connection cover

at the lower rear side of the coffee

machine.

^

Take the angled side of the stainless

steel tube and check whether the

sealing ring is in place. If necessary,

insert it.

^ Place the union nut of the stainless

steel tube onto the screw thread.

^ Make sure the fittings are tight.

Connection to the water

supply

Disconnect the machine from the

electrical supply before connecting

it to the water supply.

A faucet with a 3/4" connection thread

is required for the connection.

^

Check whether the sealing ring is in

place. If necessary, insert it.

^ Connect the stainless steel tube to

the shut-off valve.

You must only use the stainless steel

tube supplied. Old or used tubes

must never be connected to the

coffee machine.

^

Make sure the fittings are tight.

^

Slowly open the shut-off valve to the

water supply and check for leaks.

If necessary, check whether the

sealing ring and fittings are tight.

You can now continue with the

installation of the unit (see "Installation").

Plumbing

81

1 2 3 4 5 6 7 8 9 ... 18 19

Commentaires sur ces manuels

Pas de commentaire