Miele KFN 8997 SE ed Instructions d'exploitation télécharger pdf (Page 49)

^ Remove cover g, and unscrew hinge

bracket h.

^ Fit hinge pin i in the second hole of

hinge bracket h.

^ Refit bracket j and cover k turned

through 180° on the opposite side.

^ Screw hinge bracket h into the

opposite side.

The M4 screw has to be screwed into

the left hole of the hinge bracket.

^

Turn cover g through 180°, and fit it

on the other side.

^

Exchange cover l in the middle of

the appliance with hinge bracket m.

To do this:

Unscrew cover l and hinge bracket

m, turn them around and screw in on

the opposite side.

^

Pull bearing bush n downwards out

of hinge bracket m and refit it from

above into the hinge bracket.

^

Remove the plugs from the door

bearing bushes in the top of the

doors and refit on the opposite side.

^

Hang the upper appliance door on

hinge pin i and close the appliance

door.

^

Push middle hinge pin e from below

through hinge bracket m into the

upper appliance door.

^

Check that the upper door is

correctly aligned. If necessary, align

it using the long slots in hinge

bracket m.

^

Hang the lower door on hinge pin e

and then close the appliance door.

^

Fit lower hinge bracket b in the door

bearing of the lower door. Then screw

it securely to the housing.

^

Refit cover a.

Changing the door hinging

49

1 2 ... 44 45 46 47 48 49 50 51 52

Commentaires sur ces manuels

Pas de commentaire