Miele GAS COMBISET CS 1011 Instructions d'exploitation télécharger pdf (Page 37)

Installing the appliance

Feed the connection cable down

through the cut-out.

Then drop the front edge of the

appliance into the cut-out.

Using both hands, press down

evenly on the sides of the appliance

until it clicks into position. When

doing this make sure that the seal

under the appliance sits flush with

the worktop on all sides. This is

important to ensure an effective seal

all round. Do not use sealant.

^ Connect the appliance to the mains

(see "Electrical connection").

^ Check that the appliance works.

Removing the appliance

If the appliance is accessible from

below, it can be pushed up and out of

the cut-out. It must be pushed up from

the back first.

If the appliance is not accessible from

below, take hold of the appliance with

both hands at the back, pull it forwards,

then lift it up and out.

Installing / removing the appliance

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

Miele GAS COMBISET CS 1011 Instructions d'exploitation Page 37