Miele KM 2012 Manuel d'utilisateur télécharger pdf (Page 25)

Repairs to the gas and electrical components of this

appliance must only be carried out by a suitably qualified

and competent person to ensure safety. Repairs and other

work by unqualified persons could be dangerous. The

manufacturer cannot be held liable for unauthorised work.

What to do if...

... the burner does not ignite after several attempts.

Check whether

–

the burner is correctly assembled.

– the gas supply tap is turned on.

– the burner is dry and clean.

– the flame slits are dry and unblocked.

... the gas flame goes out after being lit.

During the ignition process, the flames need to touch the

ignition safety device so that it heats up.

If the flames do not touch the ignition safety device, check if

–

the burner cover is correctly in position.

–

there is no soiling on the ignition safety device. If there is,

remove it carefully (see "Cleaning and care").

Problem solving guide

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Pas de commentaire

Miele KM 2012 Manuel d'utilisateur Page 25