Miele KM 3014 Instructions d'exploitation télécharger pdf (Page 18)

Switching on

To ignite the burner, press the control knob down and turn

it anti-clockwise to the largest flame symbol.

When a control knob is activated, a spark is generated on

all burners. This is not a fault.

When the flame ignites, keep the control pressed in for

5-10 seconds, and then let it go.

Should the flame be extinguished earlier, turn the control

knob to "ß". Wait at least 1 minute before trying again. If

necessary, keep the control pressed in for longer.

If the burner does not ignite after a second attempt, turn

the control back to "ß" and go to the "Problem solving

guide" for advice.

In the event of a power cut

If there is an interruption to the electricity supply, the gas can

be ignited with a match.

^ Press in the relevant control and turn it anti-clockwise to the

largest gas symbol.

^ Hold the control pressed in and light the gas at the burner

with a match.

Keep the control pressed in for a further 5-10 seconds and

then release it.

Operation

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Pas de commentaire

Miele KM 3014 Instructions d'exploitation Page 18