Miele KM 404 Manuel d'utilisateur télécharger pdf (Page 25)

Check the intake air

a Lock screw

b Air sleeve

Gap X must measure:

– 1/2" (13 mm) for natural gas

– 1/4" (6.5mm) for LP (propane) gas

^ To adjust the gap, loosen the lock

screw and slide the air sleeve in or

out as necessary.

Tighten the lock screw and

reassemble the cooktop in reverse

order.

Check all fittings for gas leaks

before reassembling the cooktop.

After conversion

After converting the cooktop, affix the

label supplied with the conversion kit

on to the data plate over the type of

gas stated.

Check that there are no leaks e.g,

with soapy water.

Check that the burner is correctly

assembled.

Turn on the gas supply.

Light each of the burners in turn.

When set at "low" or when the control

knob is quickly turned from "high" to low

the flame should not go out.

When set at "high" the gas flame must

burn with the center clearly visible.

Converting KM 406

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

Pas de commentaire

Miele KM 404 Manuel d'utilisateur Page 25