Miele KM 520 Manuel d'utilisateur télécharger pdf (Page 35)

Preparing the worktop

Make the worktop cut-out following

the dimensions applicable.

Remember to maintain the minimum

safety distance from the back wall,

as well as from any tall unit or side

wall to the right or left of the hob. See

"Safety instructions for installation".

Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

If, during installation, you find that

the seals on the corners of the frame

are not flush with the worktop

surface, the corner radius (ß R4) can

be carefully scribed to fit.

Installation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Pas de commentaire

Miele KM 520 Manuel d'utilisateur Page 35