Miele KDN 9713 iD Manuel d'installation télécharger pdf (Page 16)

Setting the temperature

The temperature for the refrigerator

section is set using the temperature

dial.

The higher or lower the temperature in

the refrigerator section, the higher or

lower it is in the freezer section.

^

Using a coin, turn the On/Off dial in a

clockwise direction away from the "0"

position.

The higher the setting, the lower the

temperature in the appliance.

The temperature being set will flash in

the display.

Forcing the dial beyond its range will

damage it. Turn it only as far as it

will go, then turn it back again.

Temperature display

The temperature display on the

control panel always shows the

required temperature.

For example, if you want to set the

temperature for the refrigerator section

at 5°C,

^

turn the temperature selector

clockwise from 0 until 5°C lights up

on the control panel.

The temperature can be set slightly

colder than the displayed temperature

(e.g. between 5°C and 3 °C).

^

To do so, turn the temperature dial

slowly in a clockwise direction from

e.g. 5, until the 5 flashes briefly in the

temperature display.

The colder temperature is now set.

If frozen food is to be stored in the

freezer section then a setting of

between 3°Cto5°is recommended to

ensure that the required temperature in

the freezer section is maintained.

It is also advisable to set the

temperature within this range if the

doors are opened frequently, large

quantities of food are being stored in

the appliance or there is a high ambient

temperature.

Freezer section temperature

indicator light

The indicator light shows that the

freezer section is on.

The correct temperature

16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Commentaires sur ces manuels

Pas de commentaire