Miele KDN 9713 iD Manuel d'installation télécharger pdf (Page 43)

Securing the appliance and

fitting the furniture door

^

Push the appliance against the

housing wall on the side on which the

door opens so that the sealing strip is

pressed into the housing wall k.

^

Secure the appliance at the top with

screw l (4 x 19 mm) into bracket b,

pushing the appliance against the

furniture wall as you do so.

^

Then secure the appliance in the

middle by fitting screw m through the

adjusting screw.

^

Then secure the appliance at the

bottom by fitting screws n

(4 x 36 mm) through the adjusting

screws in the hinge plates.

^

Tighten all the screws.

^

If necessary, align cover strip o by

pushing it parallel to the top of the

unit - it should not protrude.

^

Fold in the side section of bracket b.

^

Replace covers c and d.

^

Cap the holes with stoppers p and

q.

^

Secure door fixings r to the

appliance doors with screws s

(3.9 x 9.5 mm), to suit the position of

the handles.

With divided doors, several door fixings

may be required.

^ Open the doors right out, and push

fixing guides t into door fixings r.

^ Position the furniture door onto the

appliance door, and secure fixing

guides t to the furniture door using

screws u (4 x 14 mm). Maintain a

distance d (= the thickness of the

housing unit walls) between the edge

of the appliance door and outer edge

of the furniture door.

^

Align the door fixing so that the

furniture door on the side with the

handle does not lie against the

housing unit wall when the door is

shut. A minimum distance of 1 mm

must be maintained.

Building in the appliance

43

1 2 ... 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire