Miele KM 406 Instructions d'exploitation télécharger pdf (Page 13)

Switching on, Switching off,

Control

The control is used to switch on the

burner and regulate the strength of the

flame.

To switch on:

^ Press in the control and then turn

anti-clockwise to the large flame

symbol.

^ When the flame ignites, keep the

control pressed in for 8-10 seconds,

and then let it go.

If the flame goes out, repeat the

procedure, keeping the control pressed

in for a few extra seconds.

To regulate the burner setting:

^

To turn the heat down from a high to

a low setting turn the control

anti-clockwise until there is a

resistance. Briefly press to turn past

the resistance. Then without pressing

it in turn the control to the required

setting.

^

To turn the heat up from a low to a

high setting, turn the control

clockwise until there is a resistance.

Briefly press to turn past the

resistance. Then without pressing it in

turn the control to the required

setting.

To switch off:

^ Turn the control clockwise until "ß" is

reached.

This stops the flow of gas and the flame

goes out.

Remember: Turn anti-clockwise to

switch on, turn clockwise to switch

off.

Stop when you feel a resistance. Do

not try to force the control further.

The control cannot be turned

anti-clockwise from the small flame

symbol to the "ß" position.

Using the gas hob

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Commentaires sur ces manuels

Pas de commentaire