Miele KM5600 Manuel d'installation télécharger pdf (Page 53)

The exact positions of the spring

clamps, and the safety brackets for

hobs with bevelled edges, are shown

in the building-in dimensions for the

particular hob.

Hobs with bevelled edges:

The sealing strip will ensure that the

hob sits securely in the cut-out. Any

gap between the frame and worktop

will reduce with time.

^

Make the worktop cut-out according

to the dimensions given in the

building-in dimensions. Remember to

maintain the minimum safety

distances (see "Safety instructions

for installation").

Worktops made of wood

^

Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

Make sure that the sealant does not

come into contact with the top of the

worktop.

^

Depending on model, place spring

clamps a (supplied) on the upper

edge of the cut-out or for hobs with

bevelled edges, safety brackets b

(supplied) flush with the upper edge

of the cut-out.

^

Secure the spring clamps a or

safety brackets b using the

3.5 x 25 mm wood screws supplied.

Installation

53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Commentaires sur ces manuels

Pas de commentaire