Miele KM6363-1 Manuel télécharger pdf (Page 37)

Problem solving guide

Problem Cause and remedy



is flashing in the

display of one or

more cooking

zones.

The rotary control for the cooking zone has been

turned to the point of resistance clockwise or anti-

clockwise for longer than 30 seconds.

 Turn the rotary control to 0. If the fault message

does not go out, there could be a technical fault.

Call Miele.

The rotary control is not

at "0", a power level has

been set for the cook‐

ing zone. The cooking

zone is not heating up.

 appears in the display

or flashes alternately

with .

There was an interruption to the power supply during

operation.

The cooking zone was switched on more than 3 mi‐

nutes ago without a suitable pan being placed on it.

The maximum operating time for the cooking zone

has been exceeded.

 Turn the rotary control to 0.

The cooking zone can now be used again.



flashes in the dis‐

play alternating

with numbers.

There is an electronic unit fault.

 Interrupt the power supply to the hob for approx. 1

minute. If the problem persists after power is re‐

stored, please contact Miele.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Pas de commentaire

Miele KM6363-1 Manuel Page 37