Miele KM6363-1 Manuel télécharger pdf (Page 41)

Safety instructions for installation

 The appliance must only be installed and connected to the electricity sup‐

ply by a suitably qualified and competent person in strict accordance with cur‐

rent national and local safety regulations.

Fit the wall units and cooker hood before fitting the hob to avoid damaging the

hob.

 The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will

not dissolve or distort. Any backmoulds must be of heat-resistant

material.

 The hob must not be installed over a fridge, fridge-freezer, freezer,

dishwasher, washing machine, washer-dryer or tumble dryer.

 This hob must not be installed above ovens or cookers unless

these have a built-in cooling down fan.

 After installation, ensure that nothing can come into contact with

the connection cable and that it is without hindrance.

 The electrical cable may not come into contact with any moving

kitchen component (e.g. a drawer) or be subject to mechanical ob‐

struction which could damage it.

 Observe carefully the safety clearances listed on the following pa‐

ges.

All dimensions are given in mm.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Miele KM6363-1 Manuel Page 41