Miele KM 2257 Manuel d'utilisateur télécharger pdf (Page 42)

Installation

Granite and marble worktops

a Worktop

b Fixing bracket (the fixing brackets

hold the lower section when the

upper section of the hob is

removed).

c Hob

d Gap

As the hob and worktop cut-out may

differ, the size of the gap d can vary.

Make the worktop cut-out according

to the dimensions given in the

building-in dimension diagrams.

Remember to maintain a minimum

safety distance (see "Safety

instructions for installation").

Fix the brackets b supplied.

Feed the hob connection cable down

through the cut-out in the worktop.

Centre the hob c in the cut-out.

Connect the hob to the mains (see

"Electrical connection").

^ Connect the appliance to the gas

supply (see "Gas connection").

^ Secure the appliance at the back and

front using the fixings supplied. See

"Securing the appliance".

^ Check that the hob works.

^ Seal the remaining gap d with a

silicone sealant that is heat-resistant

to at least 160 °C.

For granite and marble worktops,

only use silicone sealant that is

specially formulated for granite and

marble, and observe the sealant

manufacturer's instructions.

KM 2257

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

Pas de commentaire

Miele KM 2257 Manuel d'utilisateur Page 42