Miele KM6357 Spécifications télécharger pdf (Page 49)

You can change the programming of your cooktop (see

chart). You can change several settings one after the other.

After starting the programming function P (Program), an S

(Status) will appear in the timer display. With cooktops that

have 3 cooking zones, an additional display appears at the

back left.

The program is displayed in the front left and back left

settings bars. Example:

Program 3 = front left 3, back left 0

Program 14 = front left 4, back left 1

The status is displayed in the front right settings bar.

When programming is completed, a reset is carried out

automatically. This is completed when the indicator above the

s sensor comes on briefly.

Do not switch the cooktop on again until reset is

completed.

Starting the programming function

^ With the cooktop switched off, touch the s and $ sensors

at the same time until the Lock indicator flashes.

Selecting the program

To set the ones, touch the respective number on the front

left settings bar.

To set the tens, touch the respective number on the back

left settings bar.

Setting the status

Touch the respective number on the front right settings

bar.

Saving the settings

Touch the s sensor until the displays go out.

If you do not want to save the settings

Touch the $ sensor until the displays go out.

Programming

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Pas de commentaire

Miele KM6357 Spécifications Page 49