Miele KM 440 Instructions d'exploitation télécharger pdf (Page 23)

Worktop cut-out AUS/NZ

Cut the worktop according to the

dimensions in the relevant diagram,

keeping within the tolerances given.

Ensure that there is a depth of at

least 64 mm at the rear right for the

connecting cable.

Ensure that there are minumum dis-

tances of 50 mm between the rear

wall and the hob and 40 mm be-

tween a right or left side wall and the

hob.

Seal the cut surfaces with a suitable

sealant to avoid swelling caused by

moisture. The materials used must

be heat-resistant.

Installation instructions

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire