Miele KM 440 Instructions d'exploitation télécharger pdf (Page 24)

Fitting

Fix the special spring clamps b sup-

plied at the marked positions by la-

ying them on the upper edge of the

cut-out and then securing them with

the 3.5 x 25mm screws supplied.

Granite worktops

Place the special clamps b in posi-

tion and then secure with strong

double sided tape. In addition, coat

with silicone sealant.

The screws are not necessary for

granite worktops.

Guide the hob cable down through

the cut-out and connect the hob to

the power supply.

Position the hob. Then with a hand

on each side of the hob press down

on the edges evenly until it clicks

into place.

When doing this take care that the

edge of the hob is lying flat above

the worktop on all sides.

(The hob can now only be removed

with a special tool).

Shelf fitted underneath

If there is a shelf underneath the hob

there must be a minimum distance of

55 mm between the hob and the shelf.

There must be an additional air gap of

10 mm between the rear wall and the

back of any shelf.

Installation instructions

24

1 2 ... 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire